Hand Sectioning of Plant Material (Improvised Sectioning Tool)

Overview

Freehand sectioning with a single blade has a tendency to produce sections that are often too thick and irregular for reliable structural interpretation.

A simple improvised sectioning tool, from a design described by Microscopy UK, can be used to produce much thinner and more uniform transverse sections and can significantly improve the clarity of observed plant tissues.

The result represents a practical and accessible alternative to formal microtome sectioning, while retaining a strong element of manual technique.

Reference

The tool design is taken from the following article:

• “How to make thin slices of specimens. And mount them.” – Microscopy UK

Construction of the Sectioning Tool

The tool is constructed from:

• Two halves of a standard double-edged razor blade or, alternatively, two half-height single edged blades
• Electrical tape (or similar binding material)
• Two small bulldog clips

Method

1. If a standard double-edged blade is used, it is carefully split into two halves
2. The halves are aligned in parallel, making sure the alignment is as complete as possible
3. Electrical tape is used to bind the blades together securely
4. Bulldog clips are applied to maintain rigidity and prevent the blades from slipping during cutting

The resulting assembly forms a double-bladed cutting edge, which helps regulate section thickness.

Sectioning Technique

• The specimen (e.g. stem) is held firmly, in my case in a a small amount of water on a glass slide
• The blade is drawn across the specimen in a smooth slicing motion, rather than pressed directly downward
• Multiple sections are cut in succession
• The thinnest and most uniform sections are selected for mounting, often being found between the two blades after sectioning, when they can be removed using a fine paint brush after gently prising the blades apart

Benefits Observed

The introduction of this tool resulted in:

• More uniform section thickness
• Cleaner outer boundaries (epidermis and cortex)
• Reduced tearing and compression artefacts
• Improved visibility of vascular structures
• Better photographic results

In particular, it enabled the transition from general tissue visibility to clear anatomical interpretation in transverse stem sections (e.g. Hedera helix).

Limitations

Sections are still thicker than lab microtome preparation but for field and home microscopy the method represents a substantial improvement over freehand cutting.